This SRG105 'Power Carp' float has been designed and manufactured in a way never seen before!

First a hybrid eye is threaded over the stem which is then glued securely in to the tip, this is then placed in a mould with a small piece of tubing lining up with the hybrid eye. Rohacell foam is then securely moulded and pressed around the stem of the float creating an ultra strong float.

You simply pass your mainline through the body of the float and through the hybrid eye creating one of, if not the strongest float ever seen! As shown in picture 2 is how to thread your mainline through the body of the float

Approximate dimensions of floats
0.2g - Tip Width = 2mm / Tip Length = 25mm / Stem Length = 85mm / Total Length of Float = 130mm
0.3g - Tip Width = 2mm / Tip Length = 26mm / Stem Length = 90mm / Total Length of Float = 138mm
0.5g - Tip Width = 2mm / Tip Length = 28mm / Stem Length =100mm / Total Length of Float = 155mm

Constructed with:
A high quality moulded Rohacell foam body / Fiberglass stem / Strong Hybrid eye / Hollow monochrome tip

The above floats require the following silicone tubing:
SRG105 0.2g - 1.0mm
SRG105 0.3g - 1.0mm
SRG105 0.5g - 1.0mm